高温润滑脂 High temperature grease

优质高温润滑脂的特点:1)滴点高、热稳定性好2)高温蒸发量小3)高温下结焦少。

The characteristics of high-quality high-temperature grease are: 1) high dropping point and good thermal stability; 2) small evaporation at high temperature; and 3) less coking at high temperature.

长期在180℃以上工作,高温脂需要定期更换

Working temperature above 180℃ for a long time, High Temperature Grease needs to be replaced regularly

评判高温脂的寿命,依据它在工作温度的蒸发量数据

The life of high temperature grease is judged according to its evaporation data at working temperature

 

联博®高温润滑脂精选

Learnber®Selective High Temperature Grease

应用场合
Application
型号
Product of Type
工作温度
OperationTemperature
特点
Solution
耐高温氟脂 GP8014 -40℃--280℃(短期320℃) 顶级耐高温润滑脂,烤漆生产线、高温模具活动部位润滑
High temperature resistant fluorine grease Top-grade high-temperature grease, baking varnish production line, high-temperature mold moving parts lubrication
耐高温润滑脂 GP641F -25℃--250℃ 耐高温、润滑性好、寿命长
High temperature and extreme pressure grease High temperature resistance, good lubricity and long service life
高低温轴承润滑脂 PG73-17pro(聚脲)   -40℃--180℃ 工作温度宽广、润滑寿命长 DN值小于80万
High and low temperature resistant bearing grease Wide working temperature, long lubrication life, DN value less than 800,000
耐高温金属齿轮脂 GP311 -25℃--180℃ 高粘度、附着力好,正反转间隔运行减速箱
High temperature resistant metal gear grease High viscosity, good adhesion, speed reducer running at intervals of forward and reverse rotation
二硫化钼膏 GP300 -30℃--200℃,短期400℃ 高温、重载环境下金属润滑
Molybdenum disulfide paste Metal lubrication under high temperature and heavy load environment
注塑模具润滑脂 GP461F -25℃--250℃ 极压润滑、注塑模具顶针润滑、高温轴承润滑
Grease for injection mold Extreme pressure lubrication, injection mold thimble lubrication, high temperature bearing lubrication
氟硅润滑脂 GP482F/N -40℃--220℃ 低速下耐高温金属润滑PTFE减磨塑胶润滑
Fluorosilicone grease High temperature resistant metal lubricated; PTFE antifriction plastic lubrication at low speed.

 

以上仅是联博代表型号,更多信息咨询请联系

The above is only the typical model of LianBo, please contact for more information

首页    高温润滑脂 High temperature grease